Selective synthesis of alcohols from syngas and hydroformylation of ethylene over supported cluster-derived cobalt catalysts

Hydroformylation of ethylene and CO hydrogenation were studied over cobalt-based catalysts derived from reaction of Co₂(CO)₈ with ZnO, MgO and La₂O₃ supports. At 433 K a similar activity sequence was reached for both reactions: Co/ ZnO > Co/La₂O₃ > Co/MgO. This confirms the deep analogy between hydroformylation and CO hydrogenation into alcohols. In the CO hydrogenation the selectivity towards alcohol mixture (C₁-C₃) was found to be near 100% at 433 K for a conversion of 6% over the Co/ZnO catalyst; this catalyst showed oxo selectivity higher than 98% in the hydroformylation of ethylene. Magnetic experiments showed that no metallic cobalt particles were formed at 433 K. It is suggested that the active site for the step that is common to both reactions is related to the surface homonuclear Co²⁺/[Co(CO)₄]^– ion-pairing species.     

Epileptic seizure classification in EEG signals using second-order difference plot of intrinsic mode functions

Epilepsy is a neurological disorder which is characterized by transient and unexpected electrical disturbance of the brain. The electroencephalogram (EEG) is a commonly used signal for detection of epileptic seizures. This paper presents a new method for classification of ictal and seizure-free EEG signals. The proposed method is based on the empirical mode decomposition (EMD) and the second-order difference plot (SODP). The EMD method decomposes an EEG signal into a set of symmetric and band-limited signals termed as intrinsic mode functions (IMFs). The SODP of IMFs provides elliptical structure. The 95% confidence ellipse area measured from the SODP of IMFs has been used as a feature in order to discriminate seizure-free EEG signals from the epileptic seizure EEG signals. The feature space obtained from the ellipse area parameters of two IMFs has been used for classification of ictal and seizure-free EEG signals using the artificial neural network (ANN) classifier. It has been shown that the feature space formed using ellipse area parameters of first and second IMFs has given good classification performance. Experimental results on EEG database available by the University of Bonn, Germany, are included to illustrate the effectiveness of the proposed method.     

Hierarchical abnormal event detection by real time and semi-real time multi-tasking video surveillance system

In this paper, we describe how to detect abnormal human activities taking place in an outdoor surveillance environment. Human tracks are provided in real time by the baseline video surveillance system. Given trajectory information, the event analysis module will attempt to determine whether or not a suspicious activity is currently being observed. However, due to real-time processing constrains, there might be false alarms generated by video image noise or non-human objects. It requires further intensive examination to filter out false event detections which can be processed in an off-line fashion. We propose a hierarchical abnormal event detection system that takes care of real time and semi-real time as multi-tasking. In low level task, a trajectory-based method processes trajectory data and detects abnormal events in real time. In high level task, an intensive video analysis algorithm checks whether the detected abnormal event is triggered by actual humans or not.     

The effect of nanoclays on the nucleation,crystallization, and melting mechanisms of isotactic polypropylene

The influence of organomodified nanoclay (montmorillonite) on the crystallization and melting mechanisms of isotactic polypropylene (iPP) was studied. Films of both neat polymer and clay nanocomposites were prepared after molecular weight optimization through melt extrusion. Products exhibited the tactoidlike morphology since no compatibilizers were used. The effect of introduction of nanoclay within the polymer was studied through isothermal crystallization and linear heating. The results indicated that low nanoclay concentrations induce the formation of the β‐crystalline structure, its formation being inhibited with high nanoclay contents. Dynamic nonisothermal bulk crystallization experiments indicated that nanoclays act as nucleating agents of iPP. Isothermal, bulk crystallization studies indicated that the crystallization process (induction time and crystallization kinetics) is proportionally accelerated by the nanoclay presence. There was also an accelerated formation of secondary crystallization when nanoclays were present in high concentrations. POLYM. ENG. SCI., 47:1889–1897, 2007. © 2007 Society of Plastics Engineers     

EFFECT OF CROSS FLOW ON THE SPRAY CHARACTERISTICS OF AN INDUSTRIAL FEED NOZZLE

The spray characteristics of a scaled-down version of an industrial feed nozzle are studied in the presence of a cross flow. Aerated liquid nitrogen is injected through the nozzle to generate the spray. The aeration rate is low and held constant, while two different liquid flow rates are used to produce the spray. A nonuniform wind profile is chosen to represent the cross flow condition. The droplet diameter and velocity measurements are acquired using a phase-Doppler particle analyzer. The results of the present study indicate that the spray momentum flux determines the extent of the jet bending. The droplets are accelerated significantly in the initial jet region as a result of flashing. However, further downstream of the nozzle, the vaporization of the droplets is considered to be negligible. The size-velocity correlation changes significantly for the case where the spray is shifted due to the cross flow.     

Changes in serum lipids in rats treated with oral cooper

Disturbances in lipid metabolism during copper deficiency in rats are well recognized. Copper deficiency is associated with the spontaneous retention of hepatic iron. Previous studies have reported that hypercholesterolemia and hypertriglyceridemia are associated with elevated hepatic iron concentrations in copper deficient rats. There was a direct relationship between the magnitude of blood lipids and the concentration of hepatic iron. Based on these data, it has been hypothesized that iron was responsible for the development of lipemia of copper deficiency. In this study was determined the effect of increasing doses of Cu(10, 20 and 50 ppm) in the diet, on the serum total lipids, total cholesterol, triglycerides (triacylglicerols), phospholipids, non-esterified fatty acids (NEFA) and liver iron and zinc concentrations in normal rats. The results were compared with normal rats that received a balanced diet containing 0.6 and 6 ppm of Cu, respectively. The results show that Cu-supplement diminished the cholesterol and triglyceride serum levels, increased the level of phospholipids, NEFA and concomitantly decreased the hepatic concentrations of Fe and Zn. There was a statistically significant (p < 0.05) simple correlation between triglycerides and liver Fe (r = 0.917; R2 = 64.03%), cholesterol and liver Zn (r = 0.872; R2 = 76.07%), cholesterol and liver Fe (r = 0.995; R2 = 99.10%), liver Fe and liver Cu (r = -0.612), liver Fe and liver Zn (r = 0.837), liver Cu and liver Zn (r = -0.612), and serum triglycerides and liver Zn (r = 0.967). The mechanism(s) by which Fe and Zn determine these changes is not known; none of the enzymes that act in cholesterol and triglyceride metabolism and biosynthesis require Fe and/or Zn. The increase of NEFA is due to changes in the process of lipolysis and re-esterification of the fatty acids in blood. However, additional studies are needed for the precise mechanisms of this interrelationships to be clarified.     

A three-parameter equation for molecular weight distribution of low-density polyethylene

A new three-parameter distribution function is proposed which fits best the experimental molecular weight distribution curves of branched lowdensity polyethylenes. The data were interpreted from GPC measurements, and a special computer program was utilized in order to derive the best values of the empirical constants a, b, and c.     

Plaster of Paris activated supersulfated slag cement

Hydration and strength behavior of supersulfated cement produced by activating a granulated Indian blastfurnace slag by plaster of Paris has been investigated. It is shown that plaster of Paris is a better activator than the conventional hard burnt gypsum (anhydrite) at least for a class of blastfurnace slags which are ordinarily considered less than ideal for this purpose. The setting characteristics of the plaster of Paris activated slag were controlled by small additions of a set retarder which does not adversely affect the strength properties of the cement. X-ray analysis and DTA have been used to identify the hydration products, interpret the strength data, and to compare the plaster of Paris activated cement with anhydrite activated slag cement.     

Flow Regime Maps for Flow of Liquid Through Downcomer in a Turbulent Bed Contactor

The provision of a downcomer to classical turbulent bed Contactor (TBC) increases the gas treating capacity of the equipment. When the downcomer is provided, it is expected that all the liquid passes through the downcomer only without any liquid flow through the distributor. In the present study, the operational regime for the flow of liquid only through the downcomer is experimentally evaluated for various geometric parameters and particle characteristics. It is observed that the preferred operational regime without dumping and weeping increases with an increase in Archimedes number and downcomer diameter, and decreases with an increase in static bed height and downcomer weir height. Correlations are proposed to satisfactorily predict experimentally observed operational regime.